Chrysler Dodge Jeep Ram Factory Radio Add A Subwoofer

Chrysler Dodge Jeep Ram Factory Radio Add A Subwoofer Amp Plug & Play Harness RCA Cable Want to add a subwoofer to your original stereo? Don’t want or know how to cut into your wiring? Take the wiring guesswork out of the installation with this plug and play wire harness!  Installation is as easy as 1, 2, 3! 1. Remove your OEM factory radio 2. Unplug the OEM factory wiring and plug in this wire harness 3. Reinstall your OEM factory radio What is it? This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier, as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.  This wire, along with a set of RCA cables, is run to your aftermarket amplifier.  All that’s left for you to do is connect the main power wire from your battery and ground. (Not included) What you will receive One (1) plug and play wire harness One (1) Add-A-Circuit fuse tap One (1) 3 amp fuse One (1) 10ft RCA Cable

 (RCA pictured is for reference only, colors may vary)

Alternate Options:
Need additional parts for your installation?  Check out our other listings where RCA cables, bass knobs, and amps kits are included! Compatibility Notes Audio volume to the amplifier can be adjusted by the dials on the harness.  For easier access we recommend using an external volume knob.(Not included but we can provide one) It is up to the installer to select which circuit to use with the Add-A-Circuit.  The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate. A variety of wire colors may be used for the remote wire coming off the harness.  Regardless of color, rest assured it is for the remote turn on of an amplifier. Compatible with these models MAKE MODEL TRIM / QUALIFIER From To Chrysler 200 2011 2014 Chrysler 300, 300C 2008 2010 Chrysler Aspen 2008 2009 Chrysler Sebring 2007 2010 Chrysler Town & Country 2008 2017 Dodge Avenger 2008 2014 Dodge Caliber 2009 2012 Dodge Caravan, Grand Caravan 2008 2019 Dodge Challenger 2008 2014 Dodge Charger 2008 2010 Dodge Dakota 2008 2011 Dodge Durango 2011 2013 Dodge Durango 2008 2009 Dodge Journey 2009 2010 Dodge Magnum 2008 2009 Dodge Nitro 2007 2011 Dodge Ram Pickup 1500 2009 2011 Dodge Ram Pickup 2500, 3500 2010 2011 Dodge Ram Pickup Chassis Cab  4500, 5500 2011 2012 Jeep Commander 2008 2010 Jeep Compass 2009 2017.5 Jeep Grand Cherokee 2011 2013 Jeep Grand Cherokee 2008 2010 Jeep Liberty 2008 2012 Jeep Patriot 2009 2017 Jeep Wrangler, Wrangler Unlimited JK body type 2018 2018 Jeep Wrangler, Wrangler Unlimited 2007 2017 Mitsubishi Raider 2008 2009 Ram 1500, 2500, 3500 2012 2012 Ram Chassis Cab  3500, 4500, 5500 2012 2012 Ram C/V Tradesman 2012 2015 Volkswagen Routan 2009 2013 Converter adjustment instructions: After completing all of the necessary connections, turn the adjustment pots all of the way down by rotating them completely counter-clockwise. Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 maximum volume. Select one of the adjustment pots and turn it slowly clockwise until you notice audio distortion and then stop. Turn the remaining pot to the same position as the previously adjusted pot.

Returns Accepted for this item if it's within 30 Days