Community Veris 212S Crossover 300 W RMS, 750 W Program VERIS 212S

Community Veris 212S - Crossover Replacement for 212S Subwoofer Please see all pictures. You will receive the exact crossover pictured SPECIFICATIONS:
Loudspeaker Type: Dual driver subwoofer, rectangular, vented bass
Operating Range: 37 Hz to 500 Hz (-10 dB)
Frequency Response: 50 Hz to 125 Hz (-3 dB)
Max Input Ratings: 300W continuous, 750W program
34.6 volts RMS, 69.3 volts momentary peak
Sensitivity (1W/1m): 98 dB (50 Hz to 200 Hz) half space
Maximum Output: 123 dB SPL / 129 dB SPL (peak)
Nominal Impedance: 4 ohms
Minimum Impedance: 4.2 ohms @ 110 Hz
Nominal –6dB
360° H x 180° V Beamwidth:
Recommended Signal 40 Hz, 24 dB/octave high pass filter
Drivers: LF 2 x 12-inch
Driver Protection: DYNA-TECH protection circuitry
Input Connection:
NL4-compatible locking connector with terminal strip in parallel
Controls: None
Enclosure: 18mm, 11-ply cross-laminated birch
Mounting/Rigging
8 x M10 threaded rigging fittings Finish:
Catalyzed polyester two-part paint,
black or white
Grille: Powder coated steel, black or white finish
Required Accessories: None
Supplied Accessories: Rubber feet, black (4) M10EYBLTKIT 10mm eyebolt kit (4)
Optional Accessories: STKIT seat track kit
Dimensions—Height: 13.9 inches (354 mm) - not including feet
Width: 35.9 inches (912 mm)
Depth: 17.9 inches (455 mm)
Weight: 70 lbs (31.8 kg)
Model Options:
APPLICATIONS
V2-212SB (black finish)
V2-212SW (white finish) NOTES:
1. Sensitivity: Free field pink noise measurement at 6ft (1.8m) at 10% power;
extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
3. Sensitivity: Subwoofers measurements are performed half-space. FEATURES:
Low profile design fits tight spaces
DYNA-TECHTM driver protection circuitry
Patented Cool-CoilTM heat evacuation technology to minimize
cone driver power compression
Eight M10 threaded rigging fittings (four on each end panel)
Terminal strip and NL4-compatible connectors
Available in standard black or white finishes DESCRIPTION :
The V2-212S is a low-profile, dual-driver subwoofer system
designed to augment and extend the low frequency output of
any VERIS 2 full-range loudspeaker system. Powerful and low
in distortion, the V2-212S produces authoritative low frequency
output. The result is a deep, but punchy sonic signature that
can handle most any musical style with ease. Solidly
constructed of cross-laminated birch plywood, this subwoofer
provides an accurate acoustic response uncolored by enclosure
resonance. Its small size makes it a perfect fit for jazz clubs,
bars, restaurants, worship centers, AV presentations, and other
applications that require extended bass, but do not have the
space available to install larger, bulkier systems.
The enclosure may be suspended from its M10 threaded rigging
points, or simply located on the floor. As with all subwoofers, a
corner placement is recommended when possible, in order to
take advantage of the acoustical boundary effect for the highest
possible efficiency. The V2-212S includes Community’s
exclusive DYNA-TECHTM driver protection circuitry to protect
against abusive operating conditions, and also features
Community’s patented Cool-CoilTM heat evacuation technology
to minimize cone driver power compression and ensure long-
term reliability.
The V2-212S is a versatile performer for applications requiring
high quality, high power, and extended low frequency response
at a reasonable cost.
This Community Veris 212S was tested and pulled from a local university and is in great working condition. Please see all pictures for further details.

Returns Accepted for this item if it's within 30 Days