Sound Storm Laboratories Us8 8 Inch Under Seat Powered Car Subwoofer
– Amplified
USD $91.64
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Break Your Subwoofer In
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to.
This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.
The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance. 10-inch subwoofer, Built-in class A/B amplifier, MOSFET power supply Soft turn-on circuit, RCA (low) & speaker (high) level inputs Thermal, short and overload protection circuit Green LED power status indicator, red LED protection status indicator Subwoofer level control, switchable phase shift selector switch: 0 or 180º Variable low pass crossover: 50 – 150 Hz Variable bass boost: 0 – 12 dB, variable input gain control, speaker impedance: 2.6 ohms S/N ratio: 90 dB, frequency response: 30 – 150 Hz
Built-In Amplifier
Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Phase Control
Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Much like the engine of a new automobile, a new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to.
This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure.
The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance. 10-inch subwoofer, Built-in class A/B amplifier, MOSFET power supply Soft turn-on circuit, RCA (low) & speaker (high) level inputs Thermal, short and overload protection circuit Green LED power status indicator, red LED protection status indicator Subwoofer level control, switchable phase shift selector switch: 0 or 180º Variable low pass crossover: 50 – 150 Hz Variable bass boost: 0 – 12 dB, variable input gain control, speaker impedance: 2.6 ohms S/N ratio: 90 dB, frequency response: 30 – 150 Hz
Built-In Amplifier
Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.
High and Low Level Inputs
High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Class A/B
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.
Variable Bass Boost
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Phase Control
Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.
Short Protection
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
